Maywood Original Series Rectangular Laminate Hotel Folding Table-USA MADE

Available Colors:

• Legs made from 1 1/2" square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4" x 1" x 1/8" rerolled high carbon steel angles.
• Two (or three, depending on the model) additional steel cross rails where needed.
• A rectangular stretcher piece, 1 1/2" x 4", is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4" steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4" wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30" x 30" and 36" x 36" squares and the 30", 36", 42"and the 48" diameter rounds all have individual single leg folding action
• Metal caps standard
• Folded thickness: Rectangular - 2 1/2" Rounds - 2 7/8"